RxnWorks

Chemical reactions: nomenclature, balancing, precipitation, redox, stoichiometry, limiting reagent, formulas and titration.
Read the idea in Learn, then practise. Each tab has Hint, Reset and Skip, 3 levels and a crown to win.

Track 1 · General Chemistry I · part of ChemTracks

Start here: the language and arithmetic of chemical reactions

Chemistry is written in formulas and equations. In this track you will name compounds, balance equations, predict precipitation reactions, track electrons with oxidation numbers, and then do the central calculation of chemistry: how much of a substance reacts or forms.

Build it, test it, own it

Read the idea in Learn, then practise it. Every tab has Hint, Reset and Skip, 3 levels, and a crown to win. You never need to memorize: you will see each idea again and again until it is yours.

Molar masses are in the toolbox

Use the periodic table in ElementWorks and the molar mass tool in the toolbox for every calculation.

Map of this tool. Steps 1 to 4 are the language: names, balanced equations, solubility and redox. Steps 5 to 8 are the arithmetic: stoichiometry, limiting reagent, formulas from data, and solutions.

Step 1. Naming compounds

Ionic: cation name, then anion name (-ide for monatomic anions). Metals with more than one charge get a Roman numeral. Molecular: Greek prefixes (mono-, di-, tri-, tetra-, penta-, hexa-). Acids: hydro-…-ic for binary acids; -ate becomes -ic and -ite becomes -ous in oxyacids.

Worked example. Fe2(SO4)3: sulfate is 2−, three of them give 6−, so two iron ions must be 6+, which is 3+ each. The name is iron(III) sulfate.
Learn more: polyatomic ions to know

NO3− nitrate, SO42− sulfate, CO32− carbonate, PO43− phosphate, OH− hydroxide, NH4+ ammonium. The -ite ion has one fewer oxygen (nitrite, sulfite), and per- / hypo- add or remove one more (perchlorate, hypochlorite).

Want to see it happen first? Open RxnLabs: change the moles of each reactant and watch one run out.

Step 2. Balancing equations and types of reactions

Atoms are conserved, so each element must have the same count on both sides. Change coefficients only. Start with the most complex formula, balance elements that appear once on each side, and leave O and H (or free elements) for last. Recognise the type: combination, decomposition, single or double replacement, combustion, acid–base.

Worked example. C3H8 + O2 → CO2 + H2O. Balance C: 3 CO2. Balance H: 4 H2O. Count O: 6 + 4 = 10, so 5 O2. C3H8 + 5 O2 → 3 CO2 + 4 H2O.

Step 3. Solubility and net ionic equations

Group 1 salts, ammonium salts, nitrates and acetates are soluble. Most chlorides, bromides and iodides are soluble (not Ag+, Pb2+). Most carbonates, phosphates, sulfides and hydroxides are insoluble. To find a precipitate, swap partners and test both products. In the net ionic equation only the ions that form the solid appear: spectators cancel.

Worked example. AgNO3(aq) + NaCl(aq): the new compounds are AgCl and NaNO3. AgCl is insoluble. Net ionic: Ag+(aq) + Cl−(aq) → AgCl(s); Na+ and NO3− are spectators.

Step 4. Oxidation numbers and redox

Oxidation numbers track electrons. Elements are 0, ions equal their charge, H is +1, O is −2, and everything must add to the charge of the species. Oxidation is loss of electrons (number increases); reduction is gain (number decreases). The reducing agent is oxidized; the oxidizing agent is reduced.

Worked example. MnO4−: four O at −2 give −8 and the total is −1, so Mn is +7. In Zn + Cu2+ → Zn2+ + Cu, zinc rises 0 → +2 (oxidized, the reducing agent) and copper falls +2 → 0 (reduced, the oxidizing agent).

Step 5. Stoichiometry

Coefficients are mole ratios. Every problem follows the same road map: grams A → moles A → moles B → grams B, using molar masses for the first and last step and the coefficients for the middle step.

Worked example. 2 H2 + O2 → 2 H2O. How many grams of water form from 8.00 g H2? 8.00 ÷ 2.016 = 3.97 mol H2; × (2/2) = 3.97 mol H2O; × 18.02 = 71.5 g.
Learn more: percent purity and particles

If a sample is only 90% pure, multiply its mass by 0.90 first. For particles, multiply moles by 6.022 × 1023 (Avogadro’s number).

Step 6. Limiting reagent and percent yield

Convert each reactant to moles and divide by its coefficient. The smaller value is the limiting reagent; it sets the theoretical yield. The other reactant is in excess. Percent yield = actual ÷ theoretical × 100.

Worked example. N2 + 3 H2 → 2 NH3 with 2.0 mol N2 and 3.0 mol H2. N2: 2.0 ÷ 1 = 2.0. H2: 3.0 ÷ 3 = 1.0. H2 is limiting and gives 2.0 mol NH3.

Step 7. Empirical and molecular formulas

From percent composition: assume 100 g, convert grams to moles, divide by the smallest, and multiply if you see 1.5, 1.33 or 2.5. The molecular formula is the empirical formula × n, where n = molar mass ÷ empirical mass. In combustion analysis, all C goes to CO2, all H goes to H2O, and O is found by difference.

Worked example. 40.0% C, 6.7% H, 53.3% O: 3.33 mol C, 6.65 mol H, 3.33 mol O. Divide by 3.33: CH2O. If the molar mass is 180 g/mol, n = 180 ÷ 30.03 = 6, so the molecular formula is C6H12O6.

Step 8. Molarity, dilution and titration

Molarity = moles ÷ liters. Dilution keeps moles constant: M1V1 = M2V2. Ion concentrations follow the formula (0.10 M CaCl2 has 0.20 M Cl−). In a titration, the moles of acid and base at the equivalence point are in the ratio of the balanced equation.

Worked example. 25.0 mL of 0.100 M H2SO4 needs how much 0.200 M NaOH? Moles acid = 2.50 mmol; the ratio is 1 : 2, so 5.00 mmol NaOH; 5.00 ÷ 0.200 = 25.0 mL.

Practice chemical reactions and stoichiometry

RxnWorks is part of Track 1 (General Chemistry I) of ChemTracks. Each topic has a short lesson, a practice tab with three levels of randomly generated problems, hints and worked solutions, and a crown for mastering it. Earn every crown for a certificate.

Topics covered

Frequently asked questions

What does RxnWorks cover in General Chemistry I?

Naming compounds, balancing equations and reaction types, solubility and net ionic equations, oxidation numbers and redox, stoichiometry, limiting reagent and percent yield, empirical and molecular formulas, and molarity, dilution and titration.

How is this different from Track 0 RxnWorks?

Track 0 introduces equations and the mole. This Track 1 page adds nomenclature, net ionic equations, redox, limiting reagents, combustion analysis and titrations.

Do I get a certificate?

Yes. Earn every crown in this Works and you can claim a free certificate of completion as a PDF.

Do I need an account to use RxnWorks?

No. It runs in your browser and saves your progress on your own device.

More Track 1 practice