CalcWorks

Thermochemistry: energy, heat capacity, calorimetry, enthalpy of reaction, Hess's law and enthalpies of formation.
Read the idea in Learn, then practise. Each tab has Hint, Reset and Skip, 3 levels and a crown to win.

Track 1 · General Chemistry I · part of ChemTracks

Start here: energy changes in chemistry

Every chemical and physical change moves energy. In this track you will track heat and work with the first law, calculate heat from temperature changes, use calorimeters to measure reaction heats, and predict the enthalpy change of a reaction from tabulated data, all by following the same few ideas.

Build it, test it, own it

Read the idea in Learn, then practise it. Every tab has Hint, Reset and Skip, 3 levels, and a crown to win. You never need to memorize: you will see each idea again and again until it is yours.

Data are in the toolbox

Specific heats, enthalpies of formation and molar masses are in the toolbox and in ElementWorks. Read the sign of every number.

Map of this tool. Step 1 sets the language of energy. Steps 2 and 3 measure heat. Steps 4 to 6 use ΔH to predict how much heat a reaction gives off.

Step 1. Energy, heat, work and the first law

The system is what you study; the surroundings are everything else. Heat into the system is positive; heat out is negative (exothermic). ΔE = q + w. When a gas expands against a constant pressure, w = −PΔV (negative, the system does work). 1 L·atm = 101.3 J, and 1 cal = 4.184 J.

Worked example. A gas expands from 2.0 L to 5.0 L against 1.5 atm. w = −1.5 × 3.0 = −4.5 L·atm = −456 J. If it also absorbs 300 J of heat, ΔE = 300 − 456 = −156 J.

Want to see it happen first? Open CalcLabs: add heat or mix a hot metal into water and watch q = mcΔT.

Step 2. Heat capacity and q = mcΔT

q = m c ΔT, with c in J/g·°C and ΔT = Tfinal − Tinitial. When two objects exchange heat, what one loses the other gains. A heating curve adds the heat of each stage: warming, melting (n ΔHfus), warming again, vaporizing (n ΔHvap).

Worked example. Heat to warm 50.0 g of water from 20.0 to 80.0 °C: q = 50.0 × 4.184 × 60.0 = 12,552 J = 12.6 kJ.
Learn more: why water resists temperature change

Water has an unusually high specific heat (4.184 J/g·°C) because hydrogen bonds absorb energy. Oceans and your own body therefore change temperature slowly.

Step 3. Calorimetry

In a coffee-cup calorimeter the solution absorbs the heat of the reaction: qrxn = −m c ΔT (plus calorimeter heat capacity if given), and at constant pressure qrxn = ΔH. Divide by moles for kJ/mol. In a bomb calorimeter qrxn = −Ccal ΔT = ΔE.

Worked example. A reaction warms 100.0 g of water by 5.0 °C: qsoln = 100.0 × 4.184 × 5.0 = 2092 J, so qrxn = −2.09 kJ (exothermic).

Step 4. Enthalpy of reaction and stoichiometry

A thermochemical equation gives ΔH for the moles written. Treat kJ like a product or reactant in a mole ratio. Reversing the equation changes the sign; multiplying it multiplies ΔH. Road map: grams → moles → kJ.

Worked example. CH4 + 2 O2 → CO2 + 2 H2O, ΔH = −890 kJ. Burning 8.0 g CH4 (0.50 mol) releases 0.50 × 890 = 445 kJ.

Step 5. Hess’s law

ΔH is a state function, so if a reaction is the sum of other reactions, its ΔH is the sum of their ΔH values. Reverse an equation (change the sign), multiply it (multiply ΔH), and add until the unwanted species cancel.

Worked example. Target C + ½ O2 → CO. Use C + O2 → CO2 (−393.5) and the reverse of CO + ½ O2 → CO2 (+283.0): ΔH = −393.5 + 283.0 = −110.5 kJ.

Step 6. Standard enthalpy of formation

ΔHf° is the enthalpy change to make 1 mol of a compound from its elements in standard states; elements in their standard states are 0. ΔH°rxn = Σ n ΔHf°(products) − Σ n ΔHf°(reactants).

Worked example. CaCO3 → CaO + CO2: [−635.1 + (−393.5)] − [−1206.9] = +178.3 kJ (endothermic).

Practice thermochemistry and enthalpy

CalcWorks is part of Track 1 (General Chemistry I) of ChemTracks. Each topic has a short lesson, a practice tab with three levels of randomly generated problems, hints and worked solutions, and a crown for mastering it. Earn every crown for a certificate.

Topics covered

Frequently asked questions

What does CalcWorks cover in General Chemistry I?

Energy and the first law, heat capacity and q = mcΔT, calorimetry, enthalpy of reaction and stoichiometry, Hess's law and enthalpies of formation.

How is this different from Track 0 CalcWorks?

Track 0 CalcWorks covers measurement, significant figures and unit conversion. This Track 1 page applies calculations to thermochemistry.

Do I get a certificate?

Yes. Earn every crown in this Works and you can claim a free certificate of completion as a PDF.

Do I need an account to use CalcWorks?

No. It runs in your browser and saves your progress on your own device.

More Track 1 practice