CurrentWorks

Direct-current circuits: Ohm’s law, resistor networks, Kirchhoff’s rules, power and RC circuits.
Read the idea in Learn, then practise. Each tab has Hint, Reset and Skip, 3 levels and a crown to win.

Track 2 · General Physics II · part of PhysTracks

Start here: current flows in loops

A battery pushes charge around a closed loop. The current I is the charge per second, the voltage V is the push, and the resistance R is how hard the path fights back: V = IR. Two rules govern every circuit: the voltages around any loop add to zero, and the current into any junction equals the current out.

Build it, test it, own it

Read the idea in Learn, then practise it. Every tab has Hint, Reset and Skip, 3 levels, and a crown to win. You never need to memorize: you will see each idea again and again until it is yours.

Collapse, then expand

Replace series and parallel groups by single equivalent resistors, find the total current, then work back out to each branch.

Map of this tool. Step 1 is Ohm’s law. Step 2 is series and parallel. Step 3 is Kirchhoff’s rules. Step 4 is power. Step 5 is RC circuits.

Want to see it happen first? Open CurrentLabs: build resistor networks by dragging, tune a dimmer and charge a capacitor.

Step 1. Ohm’s law and resistivity

V = IR and a wire has R = ρL ÷ A. Stretching a wire raises R; a fatter wire lowers it.

Worked example. A 100 Ω resistor at 12 V: I = 12 ÷ 100 = 0.12 A.

Step 2. Series and parallel

Series: R = R₁ + R₂, the same current. Parallel: 1 ÷ R = 1 ÷ R₁ + 1 ÷ R₂, the same voltage.

Worked example. 30 Ω and 60 Ω in parallel: R = 30 × 60 ÷ 90 = 20 Ω.

Step 3. Kirchhoff’s rules

Loop rule: Σ voltage changes = 0. Junction rule: I in = I out. A real battery loses Ir across its internal resistance.

Worked example. A 12 V battery, r = 0.5 Ω, 5.5 Ω load: I = 12 ÷ 6 = 2 A.

Step 4. Electric power

P = IV = I²R = V² ÷ R. Energy is E = Pt; 1 kWh = 3.6 × 10⁶ J.

Worked example. A 1500 W heater for 2 h: E = 3 kWh.

Step 5. RC circuits

The time constant is τ = RC. Charging: V = ε(1 − e−t/τ). Discharging: V = V₀e−t/τ.

Worked example. R = 10 kΩ, C = 100 µF: τ = 1.0 s.

Practice DC circuits

CurrentWorks is part of Track 2 (General Physics II) of PhysTracks. Each topic has a short lesson, a practice tab with three levels of randomly generated problems, hints and worked solutions, and a crown for mastering it. Earn every crown for a certificate.

Topics covered

Frequently asked questions

What does CurrentWorks cover in General Physics II?

Ohm’s law, resistivity, series and parallel resistors, Kirchhoff’s rules, power and RC circuits.

Do I need the earlier track first?

Review CircuitWorks in Track 0 and the capacitor ideas in FieldWorks. You can open the Works in any order.

Do I get a certificate?

Yes. Earn every crown in this Works and you can claim a free certificate of completion as a PDF.

Do I need an account to use CurrentWorks?

No. It runs in your browser and saves your progress on your own device.

More Track 2 practice