ACWorks

Alternating current, RLC circuits, transformers, LC oscillations and electromagnetic waves.
Read the idea in Learn, then practise. Each tab has Hint, Reset and Skip, 3 levels and a crown to win.

Track 2 · General Physics II · part of PhysTracks

Start here: current that swings back and forth

Mains power is alternating current: the voltage and current swing sinusoidally at a frequency f. We quote the rms value, the equivalent steady value for power. Capacitors and inductors respond to the changing current with their own opposition, the reactance, and together with resistance they give the circuit’s impedance.

Build it, test it, own it

Read the idea in Learn, then practise it. Every tab has Hint, Reset and Skip, 3 levels, and a crown to win. You never need to memorize: you will see each idea again and again until it is yours.

Peak or rms?

Meters and the labels on devices give rms. Use peak values only when a problem says peak, amplitude or maximum.

Map of this tool. Step 1 is AC basics. Step 2 is RLC circuits. Step 3 is transformers. Step 4 is electromagnetic waves. Step 5 is LC oscillations.

Want to see it happen first? Open ACLabs: turn the AC knob on a phasor diagram, sweep an RLC resonance and step a voltage up or down.

Step 1. AC and rms

Vrms = Vmax ÷ √2, f = 1 ÷ T, ω = 2πf. Average power in a resistor is Vrms² ÷ R.

Worked example. A 170 V peak supply: Vrms = 170 ÷ 1.414 = 120 V.

Step 2. RLC circuits

XL = ωL, XC = 1 ÷ ωC, Z = √(R² + (XL − XC)²). At resonance f₀ = 1 ÷ 2π√(LC) and Z = R.

Worked example. L = 0.1 H, C = 10 µF: f₀ = 1 ÷ (2π√(10⁻⁶)) = 159 Hz.

Step 3. Transformers

Vs ÷ Vp = Ns ÷ Np and VpIp = VsIs. Raising the line voltage cuts the current and the I²R loss.

Worked example. 120 V to 12 V with 500 primary turns: Ns = 50.

Step 4. Electromagnetic waves

c = fλ, E = cB, I = ½cε₀Emax². All EM waves travel at 3.00 × 10⁸ m/s in vacuum.

Worked example. A 100 MHz FM signal: λ = 3×10⁸ ÷ 10⁸ = 3 m.

Step 5. LC oscillations

ω = 1 ÷ √(LC); energy moves between the capacitor (Q²÷2C) and the inductor (½LI²). Imax = ωQmax.

Worked example. L = 1 mH, C = 1 µF: ω = 1 ÷ √(10⁻⁹) = 3.16 × 10⁴ rad/s.

Practice AC circuits and EM waves

ACWorks is part of Track 2 (General Physics II) of PhysTracks. Each topic has a short lesson, a practice tab with three levels of randomly generated problems, hints and worked solutions, and a crown for mastering it. Earn every crown for a certificate.

Topics covered

Frequently asked questions

What does ACWorks cover in General Physics II?

AC circuits, rms values, reactance, RLC resonance, transformers, LC oscillations and electromagnetic waves.

Do I need the earlier track first?

Review CurrentWorks and MagnetWorks first, especially capacitors, inductors and induction.

Do I get a certificate?

Yes. Earn every crown in this Works and you can claim a free certificate of completion as a PDF.

Do I need an account to use ACWorks?

No. It runs in your browser and saves your progress on your own device.

More Track 2 practice