FluidWorks

Fluids: density, pressure, buoyancy, flow and Bernoulli’s equation.
Read the idea in Learn, then practise. Each tab has Hint, Reset and Skip, 3 levels and a crown to win.

Track 1 · General Physics I · part of PhysTracks

Start here: matter that flows

A fluid is anything that flows: liquids and gases. Four ideas explain almost every fluid problem. Density tells you how much mass is in a volume, pressure grows with depth, buoyancy pushes up with the weight of the fluid displaced, and flowing fluids obey conservation laws (continuity for volume, Bernoulli for energy).

Build it, test it, own it

Read the idea in Learn, then practise it. Every tab has Hint, Reset and Skip, 3 levels, and a crown to win. You never need to memorize: you will see each idea again and again until it is yours.

Watch your units

Pressure uses pascals (N/m²), areas must be in m², and 1 litre is 10⁻³ m³. Most fluid mistakes are unit mistakes.

Map of this tool. Step 1 is density. Step 2 is pressure. Step 3 is buoyancy. Step 4 is fluid flow. Step 5 is Bernoulli’s equation.

Want to see it happen first? Open FluidLabs: dive to see pressure change, float a block and squeeze a pipe.

Step 1. Density

ρ = m ÷ V. Water is 1000 kg/m³. An object less dense than a fluid floats in it.

Worked example. A 2.7 kg block of volume 0.001 m³: ρ = 2700 kg/m³ (aluminium).

Step 2. Pressure

P = F ÷ A and, at depth h, P = P₀ + ρgh. In a hydraulic lift F₁ ÷ A₁ = F₂ ÷ A₂.

Worked example. At 10 m deep in water: ρgh = 1000 × 9.8 × 10 = 98 kPa gauge, about one extra atmosphere.

Step 3. Buoyancy

The buoyant force equals the weight of the fluid displaced: FB = ρfluid g Vsub. A floating object submerges the fraction ρobject ÷ ρfluid.

Worked example. A 0.5 m³ block fully under water feels 1000 × 9.8 × 0.5 = 4900 N of buoyancy.

Step 4. Fluid flow

Q = Av and the continuity equation A₁v₁ = A₂v₂: where the pipe narrows the fluid speeds up.

Worked example. Water at 2 m/s in a 10 cm² pipe enters a 5 cm² section: v₂ = 10 × 2 ÷ 5 = 4 m/s.

Step 5. Bernoulli’s equation

P + ½ρv² + ρgh is constant along a streamline: faster flow means lower pressure. Torricelli’s law v = √(2gh) follows from it.

Worked example. A hole 2 m below a water surface: v = √(2 × 9.8 × 2) = 6.3 m/s.

Practice fluid mechanics

FluidWorks is part of Track 1 (General Physics I) of PhysTracks. Each topic has a short lesson, a practice tab with three levels of randomly generated problems, hints and worked solutions, and a crown for mastering it. Earn every crown for a certificate.

Topics covered

Frequently asked questions

What does FluidWorks cover in General Physics I?

density, fluid pressure, buoyancy, fluid flow and Bernoulli’s equation.

Do I need the earlier track first?

No earlier Works are required. A little algebra and unit conversion (cm² to m², litres to m³) is all you need.

Do I get a certificate?

Yes. Earn every crown in this Works and you can claim a free certificate of completion as a PDF.

Do I need an account to use FluidWorks?

No. It runs in your browser and saves your progress on your own device.

More Track 1 practice