ConserveWorks

Work, energy, power, momentum and collisions: the conservation laws of mechanics.
Read the idea in Learn, then practise. Each tab has Hint, Reset and Skip, 3 levels and a crown to win.

Track 1 · General Physics I · part of PhysTracks

Start here: what stays the same?

Forces and accelerations get messy; conservation laws let you skip the middle. Energy and momentum are totals that stay the same when nothing external interferes, so you can compare “before” and “after” without following every moment. This Works links work, energy, power, momentum and collisions.

Build it, test it, own it

Read the idea in Learn, then practise it. Every tab has Hint, Reset and Skip, 3 levels, and a crown to win. You never need to memorize: you will see each idea again and again until it is yours.

Before and after

Write what the system has before and after. Energy: KE + PE + work done = KE + PE. Momentum: total p before = total p after. Never mix the two ideas.

Map of this tool. Step 1 is work and kinetic energy. Step 2 is conservation of energy. Step 3 is power. Step 4 is momentum and impulse. Step 5 is collisions.

Want to see it happen first? Open ConserveLabs: release a loop-the-loop ball, compress a spring and crash carts together.

Step 1. Work and kinetic energy

Work is W = F d cos θ; kinetic energy is ½mv². The net work on an object equals its change in kinetic energy.

Worked example. A 1000 kg car goes from 0 to 20 m/s: Wnet = ½ × 1000 × 20² = 200 kJ.

Step 2. Conservation of energy

Without friction, KE + PE stays constant: mgh and ½kx² turn into ½mv². With friction, subtract the energy it removes.

Worked example. A ball dropped from 20 m: v = √(2 × 9.8 × 20) = 19.8 m/s, whatever its mass.

Step 3. Power

P = W ÷ t = F v, in watts. Efficiency is useful output ÷ input; energy bills use kilowatt-hours.

Worked example. Lifting 100 kg by 10 m in 20 s: P = 100 × 9.8 × 10 ÷ 20 = 490 W.

Step 4. Momentum and impulse

p = mv and J = FΔt = Δp. A longer stopping time gives a smaller force for the same change in momentum.

Worked example. A 0.15 kg ball at 30 m/s caught in 0.01 s: F = 0.15 × 30 ÷ 0.01 = 450 N.

Step 5. Collisions

Momentum is conserved in every collision. Sticky collisions lose kinetic energy; elastic ones keep it. Recoil and ballistic pendulums use the same ideas.

Worked example. A 1000 kg car at 10 m/s hits a stationary 1000 kg car and they stick: v′ = 10 000 ÷ 2000 = 5 m/s.

Practice work, energy and momentum

ConserveWorks is part of Track 1 (General Physics I) of PhysTracks. Each topic has a short lesson, a practice tab with three levels of randomly generated problems, hints and worked solutions, and a crown for mastering it. Earn every crown for a certificate.

Topics covered

Frequently asked questions

What does ConserveWorks cover in General Physics I?

work and kinetic energy, conservation of energy, power and efficiency, momentum and impulse, and collisions.

Do I need the earlier track first?

EnergyWorks and ForceWorks in Track 0 are good warm-ups, but you can start here with basic algebra and the equations from VectorWorks.

Do I get a certificate?

Yes. Earn every crown in this Works and you can claim a free certificate of completion as a PDF.

Do I need an account to use ConserveWorks?

No. It runs in your browser and saves your progress on your own device.

More Track 1 practice