CircuitWorks

Circuits: charge and current, Ohm’s law, series and parallel circuits, and electric power.
Read the idea in Learn, then practise. Each tab has Hint, Reset and Skip, 3 levels and a crown to win.

Track 0 · Introductory Physics · part of PhysTracks

Start here: charge on the move

An electric circuit is a closed loop that lets charge flow. In this tool you will relate current, voltage and resistance with Ohm’s law, combine resistors in series and in parallel, and work out the power and cost of running appliances.

Build it, test it, own it

Read the idea in Learn, then practise it. Every tab has Hint, Reset and Skip, 3 levels, and a crown to win. You never need to memorize: you will see each idea again and again until it is yours.

Series shares current, parallel shares voltage

In series the same current flows through every resistor. In parallel every branch has the same voltage. Decide which one you have before you pick a formula.

Map of this tool. Step 1 is charge and current. Step 2 is Ohm’s law. Step 3 is series circuits. Step 4 is parallel circuits. Step 5 is power and energy.

Want to see it happen first? Open CircuitLabs: drag resistors and a battery around a board and watch the current and voltages respond.

Step 1. Charge and current

I = Q ÷ t in amperes. Charge comes in lumps of e = 1.6 × 10−19 C. Like charges repel; F = kq₁q₂ ÷ r².

Worked example. 2.0 A for 30 s moves 60 C, which is 3.75 × 1020 electrons.

Step 2. Ohm’s law

V = IR. A wire has R = ρL ÷ A: longer means more resistance, thicker means less.

Worked example. A 12 Ω resistor on 24 V carries I = 24 ÷ 12 = 2.0 A.

Step 3. Series circuits

One path. R = R₁ + R₂ + …, the same current everywhere, and the voltages add up to the battery.

Worked example. 6 Ω + 12 Ω on 18 V: I = 18 ÷ 18 = 1.0 A, with 6 V and 12 V across the resistors.

Step 4. Parallel circuits

Several paths. 1/R = 1/R₁ + 1/R₂; every branch has the full voltage and the currents add.

Worked example. 6 Ω and 12 Ω in parallel: R = 72 ÷ 18 = 4.0 Ω, smaller than either.

Step 5. Power and energy

P = IV = I²R = V² ÷ R. Energy is E = Pt; bills use kilowatt-hours.

Worked example. A 1.5 kW heater on for 4 h uses 6 kWh, costing $1.20 at 20¢ per kWh.

Practice electric circuits

CircuitWorks is part of Track 0 (Introductory Physics) of PhysTracks. Each topic has a short lesson, a practice tab with three levels of randomly generated problems, hints and worked solutions, and a crown for mastering it. Earn every crown for a certificate.

Topics covered

Frequently asked questions

What does CircuitWorks cover in Introductory Physics?

charge and current, Ohm’s law, series and parallel circuits, and electric power with energy costs.

Do I need any physics first?

It helps to try EnergyWorks first, because power and energy are used here, but you can open CircuitWorks at any time.

Do I get a certificate?

Yes. Earn every crown in this Works and you can claim a free certificate of completion as a PDF.

Do I need an account to use CircuitWorks?

No. It runs in your browser and saves your progress on your own device.

More Track 0 practice